No image available

IMMO OFF Bosch VAG ME 7.5 using 2018 FVDI

FVDI 2018 abrites commander new test report: immo off for me7.5 vag no issue.
First you need to read 95040 original dump data with carprog 
carprog-vw-me-75-immo-off-1
carprog-vw-me-75-immo-off-2
Select EEPROM function->95XX->95040
Read and verify
carprog-vw-me-75-immo-off-3
Save original dump: name it Immo Ori for example
carprog-vw-me-75-immo-off-4
Then open FVDI 2018 software
fvdi-2018-vw-me-75-immo-off-1
Select Dump Tool function
fvdi-2018-vw-me-75-immo-off-2
Select Type: ECU ME 7.x Immo Bypass (8P08/95080)
fvdi-2018-vw-me-75-immo-off-3
Upload original dump read by carprog programmer
fvdi-2018-vw-me-75-immo-off-4
Press Immo off
fvdi-2018-vw-me-75-immo-off-5
Immo is disabled.
Save Immo off data
Open carprog full software again
fvdi-2018-vw-me-75-immo-off-6
Upload Immo off data
fvdi-2018-vw-me-75-immo-off-7
Write immo
fvdi-2018-vw-me-75-immo-off-8
Success.
Done.

Leave a Reply

Your email address will not be published. Required fields are marked *