Tag: Fgtech galletto

VW Golf PCR 2.1 EGR OFF with Fgtech and WinOLS

VW Golf TDI EGR OFF Simos PCR 2.1 completed successfully Unlock Simos PCR 2.1 with fgtech galletto v54 on bench ERG off with WinOLS ecu remap software Clear fault codes using vag scanner vcd-s or odis photo attached:                     Related post: https://fgtechgallettov54.blogspot.com/2017/06/use-fgtech-galletto-clone-to-write-pcr-21.html

Fgtech Galletto Win7 Win8 Win10 Software Installation

Here is the detail guide to install Fgtech Galletto 4 V54 master ecu programmer software driver on Windows XP, Windows 7, Windows 8, Windows 8.1 and Windows 10 respectively. Part 1.Operation System Requirements Part 2. Install FGTech EOBD2 Software setup Part 3. Install Window XP Driver   Part 4.Win7/Win8/Win10 Driver Installation Part 5.Enable Driver for Window 8 Part […]

Read Audi TT EDC17C46 ECU with Fgtech Galletto V54

Reading Audi TT EDC17C46 boot mode by FGTech Galletto 4 V54 master. Photo attached:                   http://www.obdii365.com/wholesale/v54-fgtech-galletto-4-master-bdm-tricore-obd-function.html

Renault Sirius 32N Immo off using Fgtech Galleto V54

As titled, here’s the wiring connection pinouts to Renault IMMO Off using Fgtech galletto 4 V54master ecu programmer. Renault Siemens Sirius 32N in boot mode     http://www.obdii365.com/wholesale/v54-fgtech-galletto-4-master-bdm-tricore-obd-function.html

Fiat Marelli ECU Wiring Pinouts to Fgtech Galletto

Look here: how to connect Fgtech galletto v54 master with a Marelli ECU on Fiat Marelli MJD 8F2  8DF  8DS – MPC5565 – FIAT DIESEL Marelli MULTIAIR 8GMF.A5 – MPC5565 – FIAT BENZINA Marelli MULTIAIR 8GMF.01 – SPC5553 – FIAT BENZINA MARELLI 7GF – MPC5554 – FIAT How to read/write Marelli ECU at a decent price: Working […]

Volvo V70 EDC15C11 Read and Write by Kess, Ktag, MPPS or FgTech?

Here are optional solutions of Volvo V70 EDC15C11 ECU read and write using different ECU programmers, incl. Kess V2, Ktag, MPPS cable, FgTech Galletto 4 V54. Car: Volvo V70 D5 2004 163hp Ecu: I think the car has either a EDC15C2 or EDC15C11 ecu. (K-suite states EDC15C2) Option 1: You can use Fgtech Galletto V54 Rread/write work only […]

Read and Write Bosch ECU MED17.5 with Fgtech Galletto

The ECU is built on the Infineon Tricore TC1766 processor. In the chip of the processor is a flash memory in volume of 1504 bytes and EEPROM in 32 bytes. There are two ways to read-write a block: via the OBD connector and through the BSL bootloader (the so-called boot-mode) Each of the methods has […]

How to Unlock VAG PCR 2.1 ECU with Fgtech Galletto on Bench

How to unlock SIMOS PCR 2.1 ECU from 2011 1.6 TDI VAG to remap on the bench using FG TECH galletto. How FGTech Galletto 4 V54 remap Simos PCR 2.1 ECU? Step1. Open Simos PCR 2.1 ECU, connect resistor and make jumper. Step2. Unlock Simos PCR 2.1 ECU on bench then close it. Step3. Put ECU inside […]

Xprog or UPA to Renew Volvo XC90 ECM

Question before entering: I have a 2003 XC90 ECM that I need to clone or renew a used unit. I have xprog, upa, and galletto Very new to this, only used galletto so far Can someone instruct me? Solution: Read eeprom from the original and write to the donor. or exchange eeprom. if it does […]

Ktag read/write Mercedes ML166 edc17cp46 via OBD

It’s possible to make full read of Mercedes ML w166 edc17cp46 with Ktag master clone and trasdata software? Yes,work 100% ECU: Mercedes ML w166 bosch edc17cp46   Both Fgtech Galletto v54 clone and Ktag OK for Mercedes edc17cp46?   read and write edc17cp46 2013 and unlock tprot with Galletto v54eu: 90% of EDC17cp46 can be read/write […]