Here are adapter schematics to original scorpio-lk Orange 5 programmer.
Orange-5 Connectors and Panels
Adapters compatible with Orange2,3 are attached to connector SE.
Microwire 93cXX Connections (DIP8,SOIC8,SOIC14)
Adapter for reading ISO smart-card
Adapter for Programming microcontrollers ATMEL AT89Cx051
Orange5 Adapter for serial programming of microcontrollers ATMEL AVR
Instead of the quartz resonator reference frequency from terminal P12 can be used.
Programming Microcontrollers MICROCHIP PIC
Adapter CAN K-Line
K-Line Pullup Jumper determines connection of the pullup resistor.
The jumper can be in three positions – 5V, 12V or removed.
Also external power supply (12V) can be attached in contact +Vbat
Jumper CAN Terminator if attached connects a resistor (120 Ohm) between CAN H and CAN L chains.
Adapter for Programming ER1400
Adapter for Programming MDA2061, MDA2062
+20V power supply during programming is attached to connector Vpp
If you need cheaper Orange5 clone, please visit: http://www.obdii365.com/wholesale/orange5-programming-device.html