Kess V2 Master ECU Tuning Kit

Questions: 

I tried to correct the odometer on my BMW X5 2010 instrument.  But Yanhua Digimaster 3mileage programmer gave me error “This function is for testing by conner only. The formal issuance will be advised later.”

Here was my operation picture uploads:

 

 

 

 

 

When i enter from Diagnostic socket adjustment, it gave me another error “Not find device”

 

 

 

 

Obdii365.com engineer solution:

You have enter the wrong menu thus leads to operation failure. Here’s the correct menu in Digimaster3:

Select Meter System->Europe->BMW->1 series (E87)

 

 

Select Deal with CAS module->Black CAS->9S12XDP512 to check the CAS wiring connection

MC68HC9S12 Dx512 wiring diagram
You need a extra CAS BDM Programmer to work with

Then select Meter Adjustment (Mileage Correction)->35080 v6
You will need another 35080 V6 adapter and then follow Digimaster III prompts to continue until complete.

 

 

 

http://www.obdii365.com

https://obdii365.blogspot.com/2018/10/yanhua-digimaster-3-change-mileage-on-bmw-x5-2010.html