AT200 programmer is confirmed to work good with BMW MSD85 MSD87 MSV90 – able to read isn without any issue!
Purpose: To check if the AT200 programmer is working or not
Function for the test: Read ISN
BMW DMEs for the test: MSD85 MSD87 MSV90
Step 1: install and run AT-200 programming software
Step 2: connect the AT-200 with the DME and the laptop
Step 3: select the model
Step 4: read the wiring and check if the connection is correct or not
Step 5: CGDI AT-200 identifies the DME and then reads out the ISN
Step 6: AT-200 is verified to works good!
The test: (images)
AT200 and MSD85
AT200 and MSD87
AT200 and MSV90
Time to use: less than 2 minutes for each test
Note: each part covers the programmer and DME connection (wiring), the instructions…
BMW F02 750i SIEMENS MSD85
BMW F02 760i SIEMENS MSD87
Model and ECU: BMW F02 730Li SIEMENS MSV90
Result: All success!
AT-200 ecu programmer can read out Siemens MSD85, MSD87 , MSV90 and other ecus N55, N20.