Autel MaxiIM IM508 and IM608 series recently released VAG MQB NEC35XX locked immo data reading. The function requires XP400 Pro and APB130 adapter.
Compatible with Autel IM508S, IM608 PRO II (IM608 II) IM508, IM608 PRO with XP400 Pro.
Update Information and MQB car, cluster and chip type, check the previous post:
Autel IM508 IM608 Updated VAG MQB48 NEC35XX IMMO
Procedure:
(Images may not clear, never mind, will update later)
Prepare IM508/IM508, XP400 PRO, APB130 adapter, remove and disassemble MQB cluster
Select VW-> Expert selection->NEC35XX locked (via dump)->chip type, i.e D70F3526-> Read chip data via programmer
IM608 will show you wiring diagram and instructions
Follow wiring diagram to solder mqb cluster (lift pin method here)
Connect apb130 adapter with xp400 pro, connect xp400 pro with im608 via USB cable
Read chip data (takes 5-10 minutes) and save
Then Calculate immo data
Upload immo data just saved
Decode immo data
Save new immo data
Now you will get CS, PIN, Mac etc. Then you can make dealer key and learn key with the immo data.
