Category Archives: Xprog

No image available

XProg 5.84 Error Waiting Certificate Device Silent Solution

Bought xprog 5.84 box from China, installed on my windows 7 32bit according to the instruction video. When I am going to read eeprom the “Waiting Certificate” bar moving always. Possible reason: This means the certificate has been lost. Very important!!! xprog m 5.84 with usb dongle, no need activation, but Please be noted to click on the […]

No image available

How to Install Xprog M V6.12 Software?

Latest version Xprog V6.12 box programmer software can be downloaded here for free: Software version: V6.12, Firmware: V4.4 https://share.weiyun.com/5m5Vkw0 Password: fxo5qz or download from google drive here https://drive.google.com/open?id=1kJQot_4d_m3i4RlFCW00Nh9O3dZbgm4L What’s new in xprog 6.12? Check:  Xprog 6.12 New PCB, New Adapter, New Authorization       How to install Xprog v6.12 software? Operating system: WinXP/Win7 32bit and 64 bit […]

No image available

Difference Between Xprog V6.12 and V5.84

Here will come the latest Xprog 6.12 full kit. Xprog programmer 6.12 features new authorizations and adapters and new inner board. That is what the difference lie in Xprog 5.84 and 6.12. Now, we’ll talk about the difference: Items in parcel PCB Authorization in detail.. Xprog 5.84 and 6.12 full kit source: http://www.obdii365.com/wholesale/xprog-m-v5-84-box-ecu-programmer.html source: link will […]

No image available

Read Mercedes W215 EIS with Xprog, VVDI Prog or others?

Discussion: what is the best programmer for cl600-2001 w215 eis read? Car: cl600-2001 w215 Eis: Xhorse Vvdi prog and Xprog: which can read cl600-2001 w215 eis? Jevgenijs Kuhalskis: This Motorola is with security, vvdi can’t read Borislav Radusin: vvdi prog read this!!! Jevgenijs Kuhalskis: Can if not security Christian Montoya: Vvdi prog read 9s12 sec Jevgenijs Kuhalskis: We talked about about Motorola 705!!!!!!!!! Borislav […]

No image available

Xprog read and write Mini Cooper dash MCU 0K50E

Mini Cooper dash MCU mask 0K50E read with Xprog 5.55 clone programmer. Tested with 2 PCB and work fine!!! Read/write eeprom ok! Read/write flash ok! MCU Secured!!! http://www.obdii365.com/wholesale/xprogm-v555-ecu-programmer.html

No image available

Audi A6 ELV 1L59W 3L40K wiring diagram to Xprog

Info for read audi a6 ELV (Steering lock)1L59W/3L40K with Xprog 5.55 (clone) tested by 6 PCB and successfully done without any problemsRead/Write eeprom.successfullyRead/Write flash.successfully MCU SECURED!       Xhorse VVDI Prog the best for this job! A lot of time read ELV from AUDI with vvdi prog.But xprog is mucj cheaper than vvdi prog.

No image available

Free Download XProg 5.84 Software to read EEPROM

Problem: My Xprog V5.84 fail to read serial eeprom, don’t give eeprom options. Error “For information, please refer to xprog-m users manual” Solution from obdii365.com engineer: Xprog v5.84 default software CD does not have eeprom capabilities which is different from previous version V5.74/5.60/5.55 etc But the new v5.84 software has modified the software to enable eeprom reading. Free Download Xprog V5.84 New […]

No image available

Citroen c elysee 2015 Odometer Correction with Xprog

How to:  correct mileage on Citroen c elysee 2015 with xprog m box ecu programmer (here using version v5.55). Original odometer: 186,854 KM   Wiring connection to xprog     Mileage after correction: 71,086 KM   (Click to enlarge) Video guide: https://vimeo.com/302783757

No image available

Xprog M V5.84 Software Free Download and Install

Here you can download V5.84 software for Xprog M box clone. Software version: V5.84, Firmware:V4.4 With USB Dongle, No need to activate Firmware 4.4: Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9Language: English XPROG-M V5.84 Authorizations: AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 Motorola HC08 family authorization (allows to read/write […]

No image available

How to Repair or Unlock ATMEGA64 on Xprog

Here’s the customer solution to help users solve the problem xprog atmega64 locked and can not read or program chip issue. This is done off board with qfp64 breakout board should be able to  program onboard xprog also though. Disclaimer:  Many thanks dil6222 from cartechnology.co.uk forum. You are at your risk. Easy fix all you need is: 1. UPA USB PROGRAMMER 2. USBASP WITH […]