Tag: ktag master

 Ktag help file and Wiring for Volvo Bosch EDC17

This is a Ktag help file used for Volvo Bosch EDC17 on GPT vehicles Warnings: your own risk! To use this protocol of communication you have to remove and open the ECU. It is a risky operation, to be done with great care and caution to avoid damaging the ECU beyond repair. After opening the ECU and […]

How to Program VW Amarok EDC17CP20 ECU with Ktag

Need egr off for this VW Amarok, ecu EDC17CP20 03l906022 mcu tc1796. Reading with ktag  P187. Programming ecu amarok in process….           http://www.obdii365.com/producttags/ktag.html

Great Wall EDC16C39-6.H1 Immo Off with Ktag 7.020

Vehicle:  Great Wall BOSH EDC16C39-6.H1 EEPROM 95320 Purpose: IMMO off Device to use: Ktag V7.020 master clone  Procedure: People usually will flash Eeprom 95320 dump and connect PIN 68 and PIN 74 to turn off immo. But it is not working on this model. Because MPC Flash in CPU limit the function. Although Eeprom 95320 flashing does immo off, CPU […]

Ktag Read and Write BMW N46 Bosch mev1746

BMW 3 series Euro 2 ECU Chip Tuning N46 Bosch mev1746: On the table through ktag ksuite master http://www.obdii365.com/producttags/ktag-7020.html

How to Clone BMW MSD80 MSD85 MSD81 MSD87 ECUs with Ktag

How to: clone Siemens MSDxx (MSD80, MSD81, MSD85, MSD87, MSD85.4) ECUs for BMW SSM vehicles using original Ktag K-suite ecu programmer. To use this protocol of communication you have to remove and open the ECU. It is a risky operation, to be done with great care and caution to avoid damaging the ECU beyond repair. After opening […]