Some people reported that their Foxflash software does not start after software update or change to a new laptop. Only FoxFlash manager is working. Error” execute download with dfbtech contact support” Here is the clue. Same solution to new KT200 Ksuit programmer. There are many cause to this error. 1. Make sure Defender is off (*We found […]
If any of the interfaces that I have can read this ECU Fiat Marelli IAW 7GF? Yes, there are some affordable ecu programmers to read and write IAW 7GF. 1.Foxflash Fox flash will read and write IAW 7GF via jtag mode. FoxFlash Pinout to Fiat Marelli IAW 7GF MPC5554 Connect the multifunction cable […]
Foxflash/kt200 programmers can read and write this sid807evo of psa as well as Ford and Volvo. OBD: SID807EVO confirmed working by obd. Here’s some feedback: Ford c max sid807evo Read and Write via obd ok, Dtc off FORD 2011 SID807 evo obd read ok, write mod ok. Checksum manually, program did not ask if it […]
What ecu programmer to read and write Alfa Romeo Marelli MM10JA MPC5777 ECU? via OBD, bench or boot mode? Here top 5 tools are listed. 1). Cheapest option Foxflash programmer OBD mode: The built-in OBD does not working. It does not read the ECU ID nor read/write ECU. Boot mode: […]
How to unlock FCA Chrysler Jeep continental 2015+ GPEG2A ECU to use hptuner for tuning? What tool is used? Here’s the clue. Hptuner: No Original hptuners also can’t unlock gpec2a, need send ecu for unlock. So does the clone MPM tool. Foxflash/KT200: Recent update adds FCA GPEC2 GPEC3 GPEC4LM GPEC2A ECUs. foxFlash […]
Foxflash/KT200 will read, write and clone PSA MEV17.4.2 in both Bench and boot mode. It will do auto checksum. Foxflash MEV17.4.2 bench pinout To read and write use the following driver: → BENCH TRICORE → CITROEN / PEUGEOT → TC1767 – PSA → MEV17.4.2 Foxflash MEV17.4.2 boot pinout (Tricore […]